Javascript seems to be disabled in your browser.
You must have JavaScript enabled in your browser to utilize the functionality of this website.

Thin Plate

Tigrip® recommends a specific clamp type when horizontally moving thin plate or bundles of sheet metal as these have a tendency to sag. These clamps can also be used for transport of regular plate.

The top angle between the chain or rope legs must not exceed 60 degrees.

The THK Series are sold per each.

Tigrip THK 0.75 Horizontal Lifting Clamp 0.75 T/ Pair 0- 1"
Jaw Capacity 0 - 1" (0 - 25 mm)

Working Load Limit 0.75 tons per pair
US$349.02
Tigrip THK 1.5 Horizontal Lifting Clamp 1.5 T/Pair 0- 1-3/8"
Jaw Capacity 0 - 1-3/8" (0 - 35 mm)

Working Load Limit 1.5 tons per pair
US$388.71
Tigrip THK 3.0 Horizontal Lifting Clamp 3 T/ Pair 0- 1-3/8"
Jaw Capacity 0 - 1-3/8" (0 - 45 mm)

Working Load Limit 3 tons per pair
US$434.70
Tigrip THK 6.0 Horizontal Lifting Clamp 6 T/ Pair 0 - 2-3/8"
Jaw Capacity 0 - 2-3/8" (0 - 60 mm)

Working Load Limit 6 tons per pair
US$618.03
Tigrip THK 4.5 Horizontal Lifting Clamp 4.5T/Pair 0- 1-13/16
Jaw Capacity 0 - 1-13/16" (0 - 45 mm)

Working Load Limit 4.5 tons per pair
US$561.33
Tigrip THK 9.0 Horizontal Lifting Clamp 9 T/ Pair 0 - 2-3/8"
Jaw Capacity 0 - 2-3/8" (0 - 60 mm)

Working Load Limit 9 tons per pair
US$790.65

To top